purchased this car on 29 August 1988. My aim at the time was to have
a large ‘limousine’ type vehicle and to restore it in fairly quick
time. In hindsight how misguided was this aim? In the intervening
years a number of “other” things got in the way, mainly career, building
a house, retirement, restoring another car, travelling and so on.
Place in the Market.
This car is a fully imported Right Hand Drive ‘Export Market' standard
sedan of British origin. According to the records at the British Motor
Industry Heritage Trust the car was built at the Austin Factory, Longbridge,
Birmingham, UK on 11th December 1950 and still has the correct original
motor, body and chassis numbers as when it was despatched from the
factory. The same record shows that it was despatched direct to Australia,
but the name of the consignee is not recorded. However a plate attached
to this car shows that Larke Hoskins, of 56 Palmer Street, East Sydney
was the Australian Distributor, so it is fairly reasonable to assume
that they were the consignee’s.
When I acquired the Sheerline it was a complete car, partially dismantled,
showing its age and previous usage. The person I purchased it from,
a dealer type person from Blackheath, NSW had commenced a "restoration"
by stripping the most easily removed panels, i.e. mudguards and front
panels and the interior. He had hand painted the panels with some
sort of ‘brown’ primer and that’s where the job had finished. End
of "restoration", interest, money or whatever, so he sold it! Basically
the car was a sound car, very well worn with no accident damage evident,
but with some minor rust showing. Sometime during its life it had
been roughly repainted in a light sky blue colour. It was mechanically
very well worn with extensive country usage evident on under body
parts, ie stone damage, road metal "peppering", accumulated mud and
dust. There was some minor panel damage, mainly to the mudguards,
the left hand front door and the rear ‘beaver’ panel. The interior
of the car was a shambles, through age, wear and tear. The upholstery
and timber facings had suffered very badly with water damage from
a leaking sunroof, and the whole of the interior was full of dust,
caked mud, rat’s nests/droppings and snails. Because a number of panels
and most of the interior had been removed from the car and stacked
“in” it, I was concerned whether all the relevant parts were with
it. However when it was subsequently ‘sorted’ out all was well, as
all the necessary parts appeared to be there.
My subsequent work on the car showed that my original assessment had
been fairly accurate. Over the years from ’88 to early 2001 I did
some restoration work on the car, mainly to the doors, and I made
some “rust “panels to replace the rusted parts of the car. During
this period the motor was dismantled and over the years was reconditioned,
bit by bit, with the end result that the motor is now totally reconditioned
and rebuilt. In early 2001 after my commitments to “Austin’s Over
Australia” had finished (I was the Rally Director), I really got serious
about restoring the car. The previously dismantled panels were all
refitted and aligned, and repaired where necessary. When this work
was completed it was totally stripped and the body removed from the
chassis. The whole chassis and running gear was totally dismantled,
restored and rebuilt, to original “new” condition. The whole car,
chassis and body were then sand blasted and painted in its present
colours. During the stripping and repairing of the body some good
samples of the original colour scheme were located on some of the
inner panels. This colour was reproduced and the car has been finally
painted in a light green metallic colour, as close as possible to
the original colour.
Probably the biggest ‘headache’ in the whole restoration was the restoration
of the doors. These doors have a timber inner frame, which rots quite
readily, particularly the lower portion, with a steel outer frame
and steel skin. The problem being that when the doors were originally
made they were constructed from the inside out, with the steel skin
being the last thing put onto the door. All the fasteners and screws
in the timber frame were put in place, from the outside towards the
inside, before the skin was fitted. Consequently when it came to taking
the timber frames apart, none of the fasteners or screws could be
accessed from the ‘inside’ of the door, so it was necessary to break
the frames to get them out. This had to be done carefully to retain
as much as possible of the rotted frames, for patterns. The end result
is that all the doors have been totally rebuilt, but now they can
be rebuilt from the inside of the door, with all fasteners and screws
easily accessible from the inside of the door.
November 2002 the restoration of the car was semi-finished, but sufficient
and good enough for it to be registered. At this stage, even though
it was registered some of the upholstery and all of the interior wooden
facings still required total restoration. After its registration and
upon being used, particularly in the hot weather, it became evident
that it had a problem with overheating, despite the fact that I had
made some modifications during restoration, in an effort to prevent
this happening.. These cars have a reputation, even in the UK for
overheating. Subsequently a fair bit of further experimentation and
modification was carried out in an effort to reduce the overheating.
I’m pleased to say that the modifications were successful and the
motor now operates within a temperature range of 165F to 185F. Since
its registration the upholstery has been completed by Dave Kracht
of DNA Upholstery, Katoomba, NSW and I renewed all the veneer facings.
My mate Warren Hopgood, who is a French Polisher by trade, completed
the finish of the wooden trim, but with modern 2 pack materials, not
of the Sheerline.
The history of the car is fairly well known. There have been four
genuine previous owners, and 1 "restoring", before the car came into
my possession. The name of the original owner, who lived in Orange,
NSW is not known so little is known of its initial history. The subsequent
four owners were an “SP” bookie in Orange, NSW, 2 farmers at Parkes,
NSW and then the “restoring” owner at Blackheath. With the exception
of my ownership and that of the “restorer” at Blackheath the car has
spent all of its life in the Orange and Parkes areas of Central Western
NSW. Despite the fact that these are fairly large cars, at best they
are really only a very comfortable 4 seater, and at worst a very ‘squeezy’
6 seater. In short they are a very standard type of car for the era
and with the exception of an in built jacking system had no outstanding
innovative mechanical or other feature. They are quite luxuriously
finished, with Walnut timber facings for dash and door trims, with
very comfortable leather seats, fitted with central and side arm rests,
front and rear, and plenty of leg room, for all seating positions.
They had as standard equipment a good quality ‘Ekco’ brand medium
and short wave radio, and a built in heater demister. They have quite
good road holding ability and the ride experienced is very smooth
and comfortable. Despite their size and weight they are reasonably
‘nimble’ cars on the road, being able to easily accelerate, keep up
with, and stop with modern traffic.
am looking forward to many miles of pleasant motoring in this car.
have held the following positions in the Club:- (dates are approximate)
Club Registrar, 1983
Club President, 1984 to 1990
AOA Rally Director, Queanbeyan 2001.